Glow in the Dark Water Mist Fire Extinguisher Sign
zoom_out_map
chevron_left chevron_right

Glow in the Dark Water Mist Fire Extinguisher Sign

Fire extinguisher signs are ideal to mount above fire extinguishers and help identify the uses of the extinguisher itself. This photoluminescent glow in the dark sign is available in rigid plastic or self adhesive.

 

  • Available in 1.3mm thick rigid plastic or self-adhesive photoluminescent glow in the dark material.
  • PSPA Class C
  • Trade and bulk inquiries are welcome. Please email trade@rainbowsafety.co.uk or enter your details by clicking here.
  • Charges itself by absorbing light from daylight or artificial light and then emits light in the darkness.
  • Can be read in total darkness.
  • Order your sample pack of glow in the dark material by clicking here.
  • Custom photoluminescent signs are available. To order a custom sign please click here.
  • 150mm x 100mm
  • Extra Glow in the Dark Self Adhesive (Class C)
  • Extra Glow in the Dark Rigid Plastic (Class C)
  • Glow in the Dark Self Adhesive
  • Glow in the Dark Rigid Plastic

£1.95 VAT excluded

£1.95 VAT excluded

CPPP.57Y-SA
  1. What are glow in the dark fire identification signs?

    Glow-in-the-dark fire extinguisher identification signs are photoluminescent signs that identify the type and location of the fire extinguisher. They charge from normal lighting and glow between 8-12 hours in complete darkness.

  2. Do I Require Fire Extinguisher Identification Signs?

    You need them to comply with BS 5499 regulations and to ensure people can locate fire extinguishers during power outages or emergencies when visibility is poor.

  3. How long do glow in the dark fire ID signs stay visible after lights go out?

    Our photoluminescent fire identification signs provide bright visibility for 8-12 hours in complete darkness after being charged by ambient light. The brightest glow occurs in the first few hours, gradually dimming but remaining visible throughout the night. They automatically recharge from any light source during normal conditions.

  4. Do glow in the dark fire ID signs need electricity or maintenance?

    No, they require absolutely no electricity, batteries, or external power source. The photoluminescent technology absorbs light energy from normal room lighting and releases it as a glow when needed. They're completely maintenance-free and guaranteed to work during power failures when fire identification is most critical.

  5. Where should I install these signs?
    • Directly above the extinguisher
    • At eye level (around 1.7–2.0 metres)
    • In areas with sufficient ambient light to recharge the glow
1mm Rigid Plastic Self Adhesive Vinyl
  • Our most popular choice for safety signs
  • Can be used indoors or outdoors
  • Can be drilled or stuck onto a wide range of materials
  • UV and weather resistant
  • Gloss white finish with an adhesive backing
  • Mainly for indoor use, but can be used for outdoors
  • Easy to apply
  • For best results, it must be applied to clean, dry and smooth surfaces
4mm Correx® 3mm Aluminium Composite
  • Fluted corrugated board
  • Most used in for sale signs
  • Recyclable and lightweight
  • Ideal for temporary signs
  • Aluminium white face with resin core
  • Internal or external use
  • Ideal for large boards up 2400mmx 1200mm
  • Used for permanent signs
Photoluminescent Self Adhesive Class C Photoluminescent Rigid Grade C
  • Self charges using ambient light
  • Available in the higher performance PSPA rated "Class C" classification for a longer glow
  • Easy to apply to a smooth, clean surface
  • Ideal for indoor use
  • 1.3mm thick photoluminescent rigid plastic
  • Exceeds PSPA Class C classifications. Glows 3x brighter than B
  • Can be drilled or apply no nails adhesive
  • Used for fire safety signs
Brushed Aluminium Brushed Aluminium Self Adhesive
  • Made from 3mm aluminium composite board with a brushed aluminium effect
  • The brushed aluminium effect gives the sign a contemporary smart finish
  • Ideal for indoor or outdoor use
  • Brushed aluminium effect
  • Self Adhesive backing
  • Easy to apply
  • Appy to a smooth, clean surface
  • Ideal for indoor use
2mm Rigid Plastic Foam
  • Can be used indoors or outdoors
  • Can be drilled or stuck onto a wide range of materials
  • UV and weather resistant
  • Available in 3mm or 5mm thickness
  • Often referred to as foamex
  • Durable and lightweight
  • Ideal for internal signs

Do you buy signs in bulk or on a regular basis? We offer the best safety sign reseller package in the industry.

Please enter your details below to find out more

To help you sell safety signs, we have a reseller digital catalogue. To view the catalogue please click on the link digital catalogue. The catalogue is available with no prices or with retail prices and can be rebranded with your details.



We can print any sign you need up to 2400mmx 1200mm on most flat materials or if you have a large order. Please fill in the form below with your enquiry details. Alternatively you can email us at support@rainbowsafety.co.uk or call 01902 590 50 50



Reviews

Write your review